Roller door developed specifically for freezer rooms
High insulating capacity and roll speed can save energy. Door System has developed the DS800 especially for use in freezer rooms, including the specially designed door curtain and the special sealing system.
We manufacture all our products at our own factory in East Jutland, complying with all applicable requirements and standards. DS800 is available in sizes up to 4.0 x 3.3 m, however not exceeding a total area of 12 m2. If you need a bigger door, choose instead the upgraded model, DS 850, which is available in sizes up to a full 4 x 5 m.
High insulating capacity
DS800 was designed for use in freezer rooms and features a door cloth specially developed not to let the cold escape. The door cloth on DS800 is no less than 43 mm thick and has special built-in stabilising features to ensure a highly efficient insulating capacity. At the same time, the cloth offers good resistance to wind loads. DS800 is equipped with a special sealing system which ensures that cold and hot air do not meet and form condensation and ice.
Save energy
Your budget will benefit if you install a DS800 insulated door with high insulating capacity and high roll speed. 75,000 kWh: These were the total savings which we calculated for one of our customers, Claus Sørensen A/S, who wanted to replace their roller door to the freezer room with a DS800. Three years later, the Danish Technological Institute’s analyses showed that the actual savings are close to 90,000 kWh.
Important characteristics of DS800 rapid roll freezer door

43mm door curtain
Specially developed door curtain with a unique sealing system with overlapping insulation to prevent the formation of thermal bridges.

High rolling speed
Opening speed: From 0.6 - 2.0 m/sec. Frame legs: 2 mm stainless steel. High strength. Easy maintenance.

Easily put back into place
In case of a collision: The door cloth can quickly and easily be put back into place without the use of tools.

Problems with ice forming all over the freezer room?
Are you having problems with the rather costly issue of ice forming all over the freezer room? A sluice with a dehumidifier, either in front of or inside the freezer room, will do the trick. This way you ensure optimal control of the air flow while minimising the loss of energy. You save money on de-icing door and evaporator – and you avoid dangerous situations with slippery floors.
"If you have special requirements for your freezer room solution, please contact me and we will find a solution together", sales manager Søren Rahbek, Door System A/S

I would like to help you - please contact me!
"With 12 years of experience in the door industry, I have built up a competence in refrigeration/frost, hygiene/cleanroom and fire requirements. I have helped many major pharmaceutical companies and often advised architects and engineering consultants. I would like to help you - please contact me on phone +45 42 14 52 02, e-mail [email protected] or use the contact form below", Søren Rahbek, sales manager at Door System A/S
Download
DoorSystem-datasheet-roller-doors-ENG.pdf261 KB
Data sheet for Door System roller doors
DoorSystem-mounting-roller-doors-DS800-850-855.pdf587 KB
Mounting instruction for Door System roller doors DS800-850-855
DoorSystem-profile-brochure.pdf604 KB
Read more about Door System A/S













